Rowlinson Workshop Shed 9'x12'

Rowlinson Workshop Shed 9' x 12'

Make room for garden projects, hobbies and organised tool storage with the Rowlinson 9x12 Workshop. Its high-eaves design and fixed styrene-glazed windows make it a practical choice for planning a dedicated garden workspace.

Double doors with a lock and key provide access, while 12mm tongue-and-groove shiplap cladding has a dipped honey-brown finish. A tongue-and-groove floor, solid board roof and mineral roofing felt are included.

Construction and included features

• 12mm tongue-and-groove shiplap cladding
• Dipped honey-brown finish
• Double doors with lock and key
• Tongue-and-groove floor
• Solid board roof
• Mineral roofing felt
• High-eaves design
• Ten fixed styrene-glazed windows: eight side windows and two front windows

Window layout

Eight fixed side windows plus two fixed front windows give ten windows in total. Keep their positions in mind when planning shelving or a workbench to make the most of the natural light.

Planning your workspace and access

Think about where tools, storage and your working area will go, leaving a clear route from the double doors. Confirm usable internal dimensions before choosing workbenches or shelving: the overall measurements below do not describe the available internal floor space.

The door is listed as 172 x 163cm (5'7" x 5'4"). Please confirm the clear opening height and width, and whether these listed figures describe the opening or the doors themselves, before planning access for bulky equipment.

Listed dimensions

• Height: 235cm (listed as 7'8")
• Width: 288cm (listed as 9'4")
• Depth: 379cm (listed as 12'5")
• Door: 172 x 163cm (listed as 5'7" x 5'4")

The 9x12 name is the nominal size. The listed width has an imperial/metric discrepancy; please confirm exact dimensions and whether overall measurements include roof overhangs before ordering. The required base footprint, usable internal dimensions and exact eaves height need confirmation.

Base preparation, assembly and care

A timber floor is included, but this does not replace the need to confirm the manufacturer’s base construction, dimensions and support requirements before preparing your site. Check the floor’s suitability for any heavy equipment you intend to store or use.

Follow the manufacturer’s assembly and care instructions, including any treatment required after assembly and ongoing maintenance of the dipped timber finish. Please contact our team to confirm installation availability, warranty details and the current estimated delivery time.

Delivery areas and surcharges

Delivery surcharges apply to the following areas:

• Delivery Zone A: DG, G, KA, ML
• Delivery Zone B: AB, DD, FK, IV*, KY, PA, PH

No delivery service is available to BT, GY, HS, IM, JE, KW, PA20–PA78, ZE, PO30–PO40 or IV41–IV56.

The manufacturer may charge extra for delivery to offshore islands where service is available. Please enquire before ordering if this might apply to you, as delivery may be delayed if arrangements are not checked when ordering.

A one-person delivery service is provided.