Custom Made Apex Shed 22' x 7'
Manufactured using heavy duty cladding of 22mm thick T&G, this apex shed
provides a strong, heavy duty storage solution. Measuring 22' x 7' (6.71m x
2.13m) and tailor made in our own workshops in Norfolk, this shed features a
22mm floor and heavy duty roofing felt.
As requested by the customer, three
banks of windows have been incorporated along the left hand side. Each bank
features three windows, the middle of which is opening. Two sets of 4' double
doors are also featured in either end, offering two access points.
The main features of this shed are:
- 22mm T&G cladding
- 22mm heavy duty floor
- Two sets of 4' doors
- Three opening windows
- Six fixed windows
- Heavy duty roofing felt
All our sheds, workshops or garages are manufactured in our own workshops to the highest of standards in the old fashioned way. Each building is lovingly hand made by trained carpenters with selected, 5th grade redwood cladding on a substantial heavy duty frame. Every building is made specifically for a customer on order and is tailored to your own individual requirements.
All our own manufactured buildings feature the following as standard:
Framing: Heavy duty framing of 2"x2" (50 x 50mm) as standard with top and bottom rails of 2"x 1½" (50 x 38mm). The timber is of a high grade and planed smooth.
Cladding: Clad in 12mm 5th Grade matching Tongue and Grooved, well seasoned Swedish red wood pine to ensure relatively knot free boards. The boards are secured to the framing by high quality galvanised nails.
Roof: Manufactured from 12mm tongue and groove boards of the same quality as our cladding ,an exterior grade 11mm O.S. Board is also available at no extra cost should you require this. Our roofs are then covered with 20kg green roofing felt as standard however a higher quality, heavy duty felt is available as are bitumen felt tiles. Roofs can even be adapted to take heavier coverings such as clay pan tiles.
Floors: Manufactured using 12mm tongue and groove boarding as standard or 16mm boards for extra durability. The floor is supported on close centred 2"x1½" (50 x 38mm) planed floor joists. .
Windows: All our windows are hand made in the old fashioned way using mortice and tenon joints and secured with high quality wood glue and star dowels. Each window has drip sills under the glass. The glass is beaded with mitred beading on a bed of silicone. Double glazing can also be supplied if required
Doors: Standard doors are 5'10" high x 2'6" wide (1554 x 792mm) made from 12mm tongue and groove boards on a fully framed, ledged and braced structure and hung on three galvanized tee hinges. All doors are fitted with a mortise keyed lock and round handle as standard. Drip strips above for added weather protection
If you are interested in a bespoke shed then please contact us to discuss your own requirements such as the layout of the building, as many permeations are possible. You may have additional requirements such as alternative cladding, security hinges, double doors, stable doors, heavy duty locks, security windows or skylights. Several other options are also available; strengthened floors, partitions, and even roll on - roll off roofs.
We specialise mainly in bespoke buildings. If you would like to have a building built to your dimensions or specifications whether it be a small kennel or a 6 bedroom log cabin then please contact us to discuss your requirements.