Asgard Gladiator Secure metal Shed 7'4x7'4
The Gladiator secure heavy duty metal shed is designed to be extremely strong and secure. This large building can be tailored to suit your needs, with extension modules available. This shed is perfect for all types of garden tools and accessories especially valuable machinery.
The Gladiator also features a metal floor.
Options and Accessories:
Choice of colour
Optional Installation available
Gladiator Accessory Pack (floor, 4 shelves, 1 tool rail, 10 hooks)
Pack of 10 Hooks
Pack of 2 Shelves
Orient Board Wooden Flooring
Ground Anchor Pack (for bikes)
Universal Metal Ramp - allowing easy access to park and remove even heavy items out of your shed. Simply place the ramp under the shed and the weight of the unit will hold it in place, allowing the door to close over the top.
Eyelets - Screw in to the pre drilled holes inside the garden storage unit for multiple, fully adjustable securing points. Perfect for hanging up or holding your garden tools. Available in a pack of 10 consisting of 2 large and 8 medium eyelets.
Height to Ridge - 1829mm
Height to Eaves - 2072mm
Width - 2260mm
Depth - 2225mm
Door Opening - h1690 x w1420mm
It is recommended that all units are situated on a firm level base. Ideally this will be concrete of 50mm depth (2"); tarmac or paving slabs are also suitable.
Base Width: 2410mm (95")
Base Depth: 2640mm (104")
Additional extension Modules - 1100mm
- Constructed from 1.2mm thick galvanised steel
- The door and door surround are reinforced with 1.6mm thick steel box sections to strengthen the normal forced entry points and resist forced entry
- The lock is protected by a 1.6mm thick steel housing
- All joints are double folded to increase strength and prevent water ingress Assembled using 5mm screws through double folds to enable maximum strength of screws to be utilised
- The base plinth is reinforced to prevent crushing when heavy objects are rolled over
- The Classic has double doors, and the trap side is double bolted for additional security Secure drill and pick resistant Euro cylinder lock
- The lock side has a 3 point locking mechanism with 10mm thick steel locking bars securing the door at the top and bottom
- A 3mm thick steel tongue locks behind bolted trap side door- producing a pair of doors with 5 locking points
- The door handle and lock set features a handle to set the door bolts and a separate lock to secure the bolts in place
- The handle has a pre-set shear point so it will snap off if forced entry is attempted, leaving the unit still locked and your valuables safe
- Additional options for extension module includes extension accessory pack (floor, 2 shelves) and wooden floor.
Extension Module Base Requirements:
Base Width: 2410mm (95")
Base Depth: 1150mm (45")
All these security sheds are waterproof but have sufficient ventilation to avoid condensation forming. In extreme conditions (such as a severe frost or heavy snow fall) some condensation may form. To minimise this, ensure the unit is situated in a well ventilated area, for example not up against a fence or wall to increase air flow around the unit.
This, together with our 4 stage pre-treatment system and epoxy-polyester powder coating paint finish, enables us to offer a 10-year anti-perforation warranty against rust. This means that the products are low maintenance and will not degenerate in appearance.
Orders to Scottish Highlands, remote areas of England and some areas of Wales will incur additional delivery costs.
If you are unsure please contact us prior to ordering on 01604 780 350.
Scotland: Costs apply to some areas. See the details at the cart check out or call us for full details.
Northern England: Certain parts of Northern England close to the borders may incur a small delivery charge. If in doubt, please contact us.
Southern England: Certain parts of Southern England such as Devon, Cornwall etc, may incur a small delivery charge. Please contact us for more information.
Wales: Costs apply to some areas.