Pent Kennel and 8' Run
A 4'x4' kennel with an 8' run area.¬†The design allows both run and kennel to be accessed by locking doors. There is an access hole to allow your pet to move between the two sections. Galvanised heavy duty weld mesh wire ensures your pets are safe and secure.
This shed is also designed to be easy to assemble with only basic tools required. No professional experience is necessary.
- 12mm tongue and groove shiplap cladding
- Kennel 4' x 4' with floor
- Run 8' x 4'
- Dog access hole
- Heavy duty wire mesh
- Door with tower bolt
- Kennel framing 34 x 44mm
- Run framing 44 x 44mm and 34 x 44mm
- Eaves height:1433mm
- Ridge height:1610mm
- Doors:1455 x 596mm
- Dip treated with water based treatment
- Heavy duty floor
- 15mm Log lap cladding
- 19mm Premier shiplap cladding
- Run on either side
Please contact us should you require any of the above options
Please note: Installation is not available within the grey zone shown
on the map below.
Delivery notice: Delivery is FREE to the areas highlighted in green on
the map below. Delivery charges apply to zones highlighted in red, yellow and
purple. Grey zone is delivery only. Please select your delivery zone from the drop down menu
below. Delivery to offshore PO postcodes will take place once a month and will also
incur an additional charge. Please enquire before ordering if this might apply
Delivery: Approx 20 Working Days
Do you have any questions?
We are very proud of our knowledge and experience, if you have any questions on this product please let us know and we'll be pleased to help.
(local rates apply) Mon - Fri 0900-1700 Sat - Sun 1000-1600
PRICE MATCHING We have dedicated staff who carefully monitor competitor prices. If you have found a better price, please let us know so we can try to beat it for you.