|
Asgard Centurion Secure metal Shed 7'3x5' (2.18x1.52m)
With theft of quad bikes, motorbikes and ride-on mowers
increasing daily, security has become a major factor in garaging of such high
value machinery, The Centurion provides the perfect solution and is
manufactured in modular sections, which enables you to decide on the exact size
that you require.
The Compact is certified by the Loss
Prevention Certification Board to LPS 1175 Security Rating 1 and is accredited
by Secured by Design - the UK Police initiative.
Options and Accessories:
Choice of colour
Optional Installation available
Centurion Accessory Pack (floor,
2 shelves, 1 tool rail, 10 hooks)
Pack of 10 Hooks
Single Shelf (full width of unit,
fits on back panel)
Plywood Flooring
Ground Anchor Pack (for Bikes)
Tool Rail
Universal Metal Ramp - allowing
easy access to park and remove even heavy items out of your shed. Simply place
the ramp under the shed and the weight of the unit will hold it in place,
allowing the door to close over the top.
Dimensions
Height to Ridge -
1829mm
Height to Eaves - 2032mm
External Length -
2184mm (86")
External Width - 1524mm
Double door width
- 1464mm (57½")
Internal Width: 1460mm
External Depth: 2160mm
Base Requirements
It is recommended that all units
are situated on a firm level base. Ideally this will be concrete of 50mm depth
(2"); tarmac or paving slabs are also suitable.
Base Width: 1730mm (68")
Base Depth: 2640mm (104")
Additional
extension Modules - 1100mm
- Constructed from 1.2mm thick galvanised steel
- The door and door surround are reinforced with 1.6mm thick
steel box sections to strengthen the normal forced entry points and resist
forced entry
- The lock is protected by a 1.6mm thick steel housing
- All joints are double folded to increase strength and
prevent water ingress
Assembled using 5mm screws through double folds to enable maximum strength of
screws to be utilised
- The base plinth is reinforced to prevent crushing when
heavy objects are rolled over
- The Classic has double doors, and the trap side is double
bolted for additional security
Secure drill and pick resistant Euro cylinder lock
- The lock side has a 3 point locking mechanism with 10mm
thick steel locking bars securing the door at the top and bottom
- A 3mm thick steel tongue locks behind bolted trap side
door- producing a pair of doors with 5 locking points
- The door handle and lock set features a handle to set the
door bolts and a separate lock to secure the bolts in place
- The handle has a pre-set shear point so it will snap off if
forced entry is attempted, leaving the unit still locked and your valuables
safe
- Additional options for the extension modules include extension accessory
pack (floor and 1 shelf) and plywood flooring.
All these security sheds are
waterproof but have sufficient ventilation to avoid condensation forming. In
extreme conditions (such as a severe frost or heavy snow fall) some condensation
may form. To minimise this, ensure the unit is situated in a well ventilated
area, for example not up against a fence or wall to increase air flow around the
unit.
This, together with our 4 stage pre-treatment system and
epoxy-polyester powder coating paint finish, enables us to offer a 10-year
anti-perforation warranty against rust. This means that the products are low
maintenance and will not degenerate in appearance.
A manufacturers brochure can be downloaded by clicking on the PDF icon.
Further support information can also be found by clicking on the "i" icon.
Delivery: Average 20 Working Days
|
Recover password
