Taylors Garden Buildings, Sheds, Log Cabins, Summerhouses
Home :: Protek Wood Protection
Search by....
Product type
Approximate Size
Price range

Recently Viewed
No recent products.

Cheap log Cabins

Excellant value, cheap Sheds

Remember Me

New recruits to our range!

Four new summerhouses have joined ...  more...

Quarterly News Letter


Sheds, Log Cabins, Summerhouses RSS feed

Protek Wood Protection

Many years of research have gone into producing Protek’s range of water based products to where the company is now acknowledged to be the market leader amongst sawmills, fence panel and shed manufacturers.

While their competitors have sought the perfect timber treatment amongst the vast range of chemicals available, Protek has been dedicated to a water based solution. The biocide is unique to them. Only top quality ingredients are used. When comparing prices with other timber treatments please remember to take into account performance and specification. It would be tempting and easy to leave out some ingredients to achieve a cheaper product but that is not Protek’s way.

Guidelines Don'ts
Application Guide How to apply
Do's Precautions

 Protek Wood Protection Guidelines

Protek’s water based timber treatments have been designed to be:-

  • Economical to use

  • Non toxic and non pollutant

  • Harmless to pets and plants

  • Biodegradable in the soil

  • Low odour and user friendly

  • Excellent in penetration and dispersal through the fibres

  • Once dry further applications can only enrich the colour

  • Easy to use by dipping, spray, roller or brush use

  • 16 colours and a Tough Clear Coat

  Top of Page


 Application Guide

Coverage per litre is approximately 8m2 on rough sawn bare timber up to 12m2 for finished timber on a first coat. A second coat will require a lesser amount. Before applying these products you must ensure that all surfaces to be treated are clean, dry and free of mud, ice and bark.

  Top of Page


  • Clean weathered and dirty wood using water, detergent and a stiff brush

  • Allow to dry fully before applying a first coat

  • Allow 4-6hours drying time between coats

  • Any previous treatments must be allowed to weather before applying a new product

  • Some planed surfaces may require a light sanding before applying the first coat.

  • Allow 24-48 hours of drying time before you subject garden furniture and decking to use and foot traffic.

  Top of Page


  • Do not apply if wet weather is expected within 48 hours

  • Do not apply in temperature below 80C

  • Do not apply to wet, damp or frozen timber

  • Do not allow the product to freeze

  • Do not contaminate ponds, waterways or ditches with chemical or container used

  • Do not allow splashes to dry, clean up with water and detergent immediately

  Top of Page


 How to Apply
  • The Wood Protector products are easy to apply with a brush, roller or spray – the application method is up to you.

  • Stir well before and during use

  • Splashes and drips can be cleaned away with detergent and warm water whilst still wet

  • To maintain protection and water-proofing treat as necessary

  • Remove excess product from the brushes and wash with warm water and detergent

  Top of Page


  • Wear suitable protective clothing and synthetic rubber / PVC gloves when using

  • Do not breath in the mist or spray, or wear suitable respiratory equipment

  • Unprotected persons and animals should be kept away from treated areas for 48 hours or until surfaces are dry

  • Remove or cover fish tanks and bowls before application

  • Cover water storage tanks before application

  • Keep out of reach of children

  • Wash splashes from skin or eyes immediately

  • Wash hands and exposed skin before meals and after use

  • Keep in original container, tightly closed, and in a safe place

  • Do not allow products to freeze

  Top of Page

Copyright 2008-2018 Taylors Garden Buildings
Concept Marketing and Distribution Ltd, Leo House, Ross Road, Northampton. NN5 5AX. Tel: 01604 780350